Sanfeng Electric Solid State Induction Heat Treatment Equipment

Description

Series solid state high frequency welder with new technology has been developed successfully through the unremitting efforts of the R & D personnel of Sanfeng Electrical Co., Ltd. .The reliability and technical specification of welded pipe have been verified. It has entered the mass production stage and to the market.

Power：100-1800KW

Pipe wall thickness:0.6-18mm

Typical welding speed:20-130m/min

Welding methods：Induction welding，Contact welding if more than 400kW

Application Scope：The welding of steel tube, stainless steel tube, aluminum tube, copper tube, H-beam and special section tube.

Equipment components:

1. rectifier cabinet 1 set, 

2. inverter cabinet 1 set, 

3. The console 1 set, 

4. 1 set of single cooling air conditioner, 

5. 1 set of cooling system.

Use environment requirements

- The equipment requires indoor installation and good grounding. The color of the grounding wire must be clearly different from the color of the control wire, and the grounding resistance is less than 4Ω.

- The altitude does not exceed 1000 meters, otherwise the rated value should be reduced.

- The highest ambient temperature should not exceed +40℃, and the lowest should not be lower than -10℃.

- The relative air temperature is not more than 85%.

- The installation inclination is not more than 5 degrees.

- No violent vibration, no conductive dust, no corrosive gas and explosive gas.

- Install in a well-ventilated place.

Equipment parameter reference